Skip to content
Close menu
Top Links
back
Top Links
Newsroom
Company

Volkswagen Navarra, S.A.

Volkswagen Navarra, S.A., Pamplona plant

The facilities of Volkswagen Navarra, S.A. in Pamplona, Spain, have an area of some 1,630,000 square meters, of which 360,193 square meters are built-up. The Volkswagen Polo, the Volkswagen T-Cross and the Volkswagen Taigo are manufactured at Pamplona. 221.122 vehicles were produced at the plant in 2021: 141.379 T-Cross, 70.899 Polo and 8.844 Taigo.

Volkswagen Navarra, S.A., Pamplona plant
Basic information
Information for the Press
Read on

Press releases

Stories

Story „Hola!, T-Cross!“
01/17/19
Models

Hola!, T-Cross!

The T-Cross comes off the line in Pamplona, Spain, next to the Polo. Production started in December 2018. The employees are enthusiastic about the brand's smallest SUV.
Read on
Back to top
Topics
Press
Service
Subscription Services

The Volkswagen Newsroom is an open platform and offers comprehensive search options to all users.

If you would like to be kept informed about our press releases and stories you can also subscribe to our media information and e-mail newsletters.

Sign up
Products as well as Volkswagen AG distributors can be found at: www.volkswagen.de
© Volkswagen 2022

The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. For further information on the differences between the WLTP and NEDC, please visit www.volkswagen.de/wltp.

We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such time as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle.

Further information on official fuel consumption figures and the official specific CO2 emissions of new passenger cars can be found in the “Guide on the fuel economy, CO2 emissions and power consumption of new passenger car models”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Str. 1, D-73760 Ostfildern, Germany and at www.dat.de.